LVD PPNMZ 300/31-40 (used)

Press brakes

Updated: 19.05.2016 21:26:54

Year: 1974

Location: Metzingen, Germany

Machine state: used

Product Description

LocationMetzingen, Germany
PriceContact Seller
ManufacturerLVD press brakes
ModelPPNMZ 300/31-40
Stroke300 mm
Serial Number5109
Stock Number333760
PaymentNet, after conclusion of contract.
DeliveryEx stock, as inspected.
Pump drive22 kW
Max. stroke300 mm
Working area4000 mm x 300 to
Pressure (to)300
Pressure, max300 to
Condition infoGood. Machine can be inspected, probably under power.
Weight, approx22 to
Sheet width (mm)4000
Table width (mm)4000
Table length (mm)4000
Table size approx250 – 4,000 mm
Working width, max4,000 mm
Stroke, pressing speed8 - 80 mm/sec
Stroke, rapid traverse80 mm/sec
Table height above floor1,000 – 1,600 mm
Side daylight of each column250 mm
Total electrical load, approx25 kW - 380 V - 50 Hz
Working width between columns3,150 mm
CategoryPress brakes in Germany
SubcategorySheetmetal/wire machines/saws

L V D (Belgium)
Heavy Duty Hydraulic Press Brake
Model PPNMZ 300/31-40 Year 1975 Serial No. 5109
Pressure, max. 300 to
Working width, max. 4,000 mm
Working width between columns 3,150 mm
Side daylight of each column 250 mm
Max. distance
between upper and lower tool holder w/o tools 550 mm
Adjustment of upper tool holder, motor driven 260 mm
Table size approx. 250 – 4,000 mm
Table height above floor 1,000 – 1,600 mm
Max. stroke 300 mm
Stroke, pressing speed 8 - 80 mm/sec
Stroke, rapid traverse 80 mm/sec
Adjustment range of back guage, approx. 500 mm
Pump drive 22 kW
Total electrical load, approx. 25 kW - 380 V - 50 Hz
Weight, approx. 22 to
Accessories / Special Features
* Simple manual control via hydraulic control valves . Electric stroke control via manual wheel presetting and electric stops. Foot pedal release. Manual pressure setting with pressure display.
* 4 x tools for table . Simple pointing tools in upper tool holder.
* Manually adjustable back guage , simple design.
* 2 consoles at the front of the machine for supporting sheet metal, simple design, approx. 800 mm.
* Machine itself does not need a pit , but the bending tool has to be sunk approx. 600 mm (x 100 mm) into the floor. Height of machine above floor approx. 3,700 mm.
This is a simple machine for steel work.
Condition : Good. Machine can be inspected, probably under power.
Delivery : Ex stock, as inspected.
Payment : Net, after conclusion of contract.